SALE! Yamaha F250 250hp 4 Stroke Extra-Long Shaft EFI Outboard Engine – USED
Yamaha Outboards
Yamaha’s award-winning V6 4.2-liter outboards have been offshore favorites for more than a decade.
$5,255.40
$7,859.89
Yamaha’s award-winning V6 4.2-liter outboards have been offshore favorites for more than a decade. Initially, boaters were attracted to their power, efficiency and intelligent design. After years of proven performance, our V6 4.2-liters have become known for something perhaps even more valuable offshore—reliability.
Top Features
V6 4.2L 250 hp
Our 4.2-liter F250 is perfect for offshore dual or center consoles, walkarounds, runabouts and pontoons. It allows you to step up your horsepower and displacement without re-rigging. Only now, it features a fresh, new cowling design (with stern light if rigged with Helm Master® EX), new integrated digital electric steering* and rerouted exhaust for enhanced reverse thrust. It just proves even the best can get even better.
Compatible with mechanical (25″ shaft) or digital controls, including new Helm Master EX
Recommended fuel: 87 Octane
Shaft lengths available: 25”, 30”, and 35″ (30″ and 35″ on F250 DEC only)
Alternator output: Up to 70 amp
SPECS:
Engine Type: V6
Displacement: 4.2L
Bore x Stroke: 96 x 96mm (3.78 x 3.78in)
Prop Shaft Horsepower: 250hp at 5500 rpm
Full Throttle RPM Range: 5000 ~ 6000 rpm
Alternator Output at W.O.T. : 50 – 70 Amp
Compression Ratio: 10.3:1
Fuel Induction System: EFI
Weight †: 250 kg (551 lbs) / 254 kg (562 lbs) / 265 kg (588 lbs)
Recommended Fuel: Octane 87
Recommended Engine Oil: Yamalube® 4M (See owner’s manual)
Recommended Fuel Filtration: Yamaha 10-Micron Fuel / Water Separating Filter (external)
Exhaust: Through Propeller
Intake: 24
Ignition: TCI Microcomputer
Spark Plug: LFR6A-11
Alternator Output: 50 – 70 Amp
Starting System: Electric
Lubrication: Wet Sump
Engine Oil Capacity: 6.3L/6.0L w/with filter
Recommended Cooling: Thermostatic Control
Ethanol Blend Limit: 10% Maximum
Gear Ratio: 1.75:1
Gear Shift: Forward, Neutral, Reverse
Shaft Length: 25″ – 30″ – 35″ (F250 DEC Only)
Degree of Tilt: DES: 69°, Mechanical 70°
Degree of Trim: -3° through 16°
Dry Weight with built-in DES: 25″ shaft 277 kg (611 lbs), 30″ shaft 283 kg (624 lbs), 35″ shaft 288 kg (635 lbs)
Dry Weight without built-in DES: 25″ shaft 255 kg (562 lbs), 30″ shaft 261 kg (575 lbs), 35″ shaft 265 kg (588 lbs)
Dry Weight with Mechanical Controls: 25″ shaft 255 kg (562 lbs)
Mounting Centers: 28.5″
Steering: Integrated, Electric Actuation
Steering Angle (maximum): 32° from center, either direction
STANDARD FEATURES
Power Trim & Tilt
Owner's Manual
Prop included
- Availability: In Stock
- Model: F250 250hp 4 Stroke
-
Brand:
Reviews
Write a Review
Related Products (11)
SALE
